Showing posts with label Accessories. Show all posts
Showing posts with label Accessories. Show all posts

How we calculate the Zipper Length?

How we calculate the Zipper Length?
The rules of zipper measurement is very simple but some time it becomes a matter of big trouble for us. Actually it depends on the fabric & zipper properties. So, at first we must need an idea about the shrinkage of body fabric & zipper tape. Some zipper measurements are not very complicated such as pocket, leg opening etc. Here, we only discuss about the front long zipper of sweat shirt or Jacket or as like that. 

 A) If the garments is hooded sweat shirt and the zipper goes up to front neck drop from bottom then the rules will as under - 

 Say, 

 Body length (From HPS) - 73 cm 

Front Neck drop (CB) - 8 cm 

Back Neck drop - 2 cm 

 (Use the below rule if the body length measure from HPS)  

Rules : Body length - (Front neck drop + Back neck drop) - 2% to 3% 

 = ( 73 - (8 + 2)) -2% 

= ( 73 - 10 ) - 2% 

= 63 - 2% 

= 61.5 cm 

OR 

 Body length (From CB) - 71 cm 

Front Neck drop(CB) - 8 cm 

 (Use the below rule if the body length measure from CB)  

Rules : (Body length - Front neck drop ) - 2% to 3% 

 = ( 71 - 8 ) -2% 

= ( 71 - 8 ) - 2% 

= 63 - 2% 

= 61.5 cm 

 B) If the garments is high neck and the zipper goes up to to of high neck drop from bottom then the rules will as under - 

 Say, 

 Body length (From CB) - 65 cm 

Front Neck drop - 6 cm 

Height of high neck - 6 cm 

 Rules : (Body length - Front neck drop) - 2% to 3% + Height of high neck 

  = ( 65 - 6) -2% + 6 

= ( 59 ) - 2% + 6 

= 57.82 + 6 

= 63.82 cm = 64 cm 

 Moreover, the rules is not always remain fixed, its may vary depends on practical situations. 

 However, I always advise that you must confirm the zipper measurement with your cutting master & production manager before place an order. 

Different types of Label which are used in garment industry?

Different types of Label which are used in garment industry?
Garments Labels:
Garments labels are sewn or printed in garments and contain, country of origin, manufacturer identification number, care instruction, and voluntary information identifying size and brand. Garments labels should be affixed and legible for the useful life of the apparel item. Garment labels are selected based on location of label (interior or exterior application); type and design of the garments; contact with the wearer’s skin; intricacy or simplicity of the label content (logo, graphic art, word, and so on); garment fabric, brand, quality, and price point; and information to be disclosed.

Label types:
Garments labels are created by manufacturers from both mature and synthetic fibers and can be woven or printed. Woven labels are more durable and maintain their appearance and legibility longer than printed labels after repeated laundering or dry-cleaning. Materials used for sew- in labels include acetate, cotton, bamboo, polyester, leather, suede, PVC, silicon, or rubber.







The basic requirements of good quality sewing thread?

The basic requirements of good quality sewing thread?
Good tensile strength
Good tensile strength holds the stitched seam securely during wash and wear.

Smooth surface and absence of faults
Smooth surface and absence of faults ensures less friction between the needle and the material during high-speed sewing. The thread must be well lubricated to increase its sew ability and resistance to abrasion.

Uniform thickness / diameter
Uniform thickness / diameter results in an even sewing thread, which moves smoothly and quickly through the needle eye and the fabric. It also affects the thread’s tensile strength, resistance to abrasion and its twist construction. An uneven thread may twist into short knots and jam at the eye of the needle.

Good elasticity
Good elasticity enables thread to recover its original length immediately after the tension has been released. The elasticity of sewing thread affects the strength and the finished quality of a stitched seam.

Good colour fastness
Good color fastness provides immunity to the different agents the thread is exposed to during manufacture and washing. The thread must hence be uniformly dyed.

Low shrinkage
Low shrinkage of the thread being used on the fabric material with higher shrinkage reduces the chances of seam puckering.

Good resistance-to chemical attack
Good resistance-to chemical attack is a desirable property for thread used in garments which may undergo washing, bleaching or dry-cleaning

Good abrasion resistance
Good abrasion resistance ensures a good sewing performance and makes the thread more durable.

The following figures show the results of thread-to-thread abrasion tests and give an indication of their respective resistance to abrasion:

If Linen, Rayon Continuous Filament (CF) has resistance of 1, then:
Cotton = 3
Spun Silk = 4
Spun Polyester = 12
CF Polyester = 30
Spun Nylon = 40
CF Nylon = 150

Good colour fastness
Good colour fastness will retain the thread’s original colour without running or fading when subjected to wash and light exposure. The thread colour should be resistant to different agents to which it is exposed during manufacture and use.

Colour fastness can be measured against:
Chlorinated water
Perspiration
Cold water staining
Dry cleaning
Pressing - wet and dry
Bleaching

Minimal metamerism
Minimal metamerism can be achieved by assessing colour with colour matching cabinets. Metamerism is an inherent property of a thread when the same thread colour appears to be different under different lighting conditions. Standard illuminants are often used to counter the effects of metamerism.

Classification of Sewing thread?

Classification of Sewing thread?
Thread classification:

Thread can be classified in different ways. Some common classifications are those based on:

1. Substrate
2. Construction
3. Finish

1. Classification based on substrate
Natural
The usage of thread made from natural substrates is now minimal in industry applications. However, the most commonly used natural thread is cotton thread.

Synthetic

Due to the limitations of natural fibres, thread users have turned to threads made from synthetic fibres as they have desirable properties of exceptionally high tenacity, high resistance to abrasion and good resistance to chemicals. They are also not significantly affected by moisture, rot, mildew, insects or bacteria.

2. Classification based on construction thread structure

Spun thread
Spun thread is made using natural or synthetic fibres. Spun polyester is one of the most widely used threads. It is stronger than cotton threads of a comparable size, and is available in a wide variety of sizes and colours.


Corespun thread
Corespun thread is a combination of staple fibres and filaments. The most commonly used corespun thread has multiple-ply construction, with each ply consisting of a polyester filament core with cotton or polyester fibres wrapped around the core.

This thread structure influences the strength of filament polyester and the sewability of cotton or polyester fibre wrap. Corespun thread is generally used for the high-speed sewing of many garment types, especially those requiring high seam strength.

Filament threads
Filament threads are stronger than spun threads of the same fibre and size. Three types of filament threads are commonly used:

Monofilament thread is made from a single continuous fibre with a specified thickness. Though monofilament is strong, uniform and inexpensive to make, it lacks flexibility and is stiff and scratchy in feel. As a result, usage is normally restricted to hems, draperies, and upholstered furniture.



Smooth multifilament thread is usually made from nylon or polyester and is used where high strength is a primary requirement. It consists of two or more continuous filaments twisted together. It is commonly used to sew shoes, leather garments, and industrial products


Textured filament thread is usually made from polyester and is used primarily as the looper thread for cover stitches. Texturing filaments gives the yarn more cover and high extensibility, but makes the thread more subject to snagging.

Basics of thread construction
All conventional sewing threads begin their production cycle as simple yarns. These basic yarns are produced by twisting together relatively short fibres or fine continuous filaments.

Some terms used in the context of thread construction are:

Twist - The ‘twist’ of a thread refers to the number of turns per unit length required to hold the fibres / plies together to give the yarn / thread substance the required strength and flexibility. A thread with an excessive twist is also likely to give trouble while sewing due to ‘twist liveliness’, which can cause snarling, loops, knots and possible spillage that prohibit stitch formation.

Twist direction - Direction of twist is identified as ‘S’ for left twist and ‘Z’ for right twist. Most single needle lock stitch and other machines are designed for ‘Z’ twist threads. ‘S’ twist thread untwists during stitch formation. Direction of twist does not affect the strength of the thread, but it can seriously impair its performance when it is used on a machine for which it is not suited.
Ply and cord - Yarns with many components are twisted together to form ply thread. Most commonly used are 2, 3 or 4 ply threads. Threads are twisted together to give corded thread. Most commonly used are 4, 6 or 9 cord threads.
Size - The overall thickness of the final thread is referred to as ‘Grist’, ‘Ticket Number’, ‘Tex’ or ‘Count’. Thread should be as fine as possible depending on the required strength of seam. Generally, thicker threads have greater strength, given the same fibre content and yarn structure. Finer threads tend to blend into the fabric surface and are less subject to abrasion than seams with heavier threads. Finer threads perform better with finer needles and produce less fabric distortion than heavier needles.

3. Classification based on thread finish

Finishes are given to a thread for two purposes

To improve sewability
Some finishes involve increasing strength, abrasion resistance and lubrication of the thread.

To achieve a specific functional requirement
Some finishes include bonding, non wick, anti-fungal, fire retardant, water repellent and anti-static finishes.

How to Measure Button Ligne in Garments Industry?

How to Measure Button Ligne in Garments Industry?
What is Button Ligne?
A button's ligne, refers to a button's size. The word ligne, is a French word that became the standard reference used by German button manufacturers in the early eighteenth century. Ligne is expressed as “L” which is the internationally recognized standard. Consensus at the time was that a "ligne" measured the inside diameter of a "round wick folded flat." One inch is equal to 40 English ligne, 11 French ligne, and 25.5 mm.

Measuring a button - When measuring buttons, we generally are referring to the diameter of the button.   A one inch diameter is called a 40-ligne, which can also be written as 40 Line or simply 40L.

Button Size Measurement Method in Garments Sector:

To measure the button size, we have to use ligne.


We Know,
1 inch = 25.4 mm = 40L
So, 1L = 0.635 mm

Button Ligne (L) = Button Diameter (mm)/0.635

Example-01:
If the button diameter is 14.20 mm then what will be the size of button?

Solution:
Here,
Button diameter = 14.20 mm,

So,

ButtonLigne(L) = Button Diameter (mm)/0.635

= 14.20 / 0.635
= 22 L

Different Ligne Button Used In Different Garments :
Typically shirt buttons range from 13 ligne on the Collar (if button down), 15 on the Sleeve, and 16 thru 20 ligne are generally used on the placket.  Pant buttons generally have a 22 or 24 ligne on the front closure, and either a 24, 27 or 28 ligne .On the back pockets.  Men’s Tailored Suits generally have a 24-ligne button on the sleeve and pant closure, and a 32 ligne on the Jacket closure, some double breasted suits use a 34 or 36 Ligne.

Button Quantities
Buttons are for the most part priced and sold by the gross or GG. One gross equals 144 individual buttons & also 1 GG equals 1728 individual buttons.  Although some high fashion buttons are priced by the piece or by the dozen, the standard unit we use at is gross.

Button Holes
This is in reference to the number of holes in the button. Buttons can be made with 2 holes, 3- holes, 4-holes and even 5-holes.  Menswear items typically are 4-hole, and Women’s clothing typically has 2-holes.  The button holes are frequently recessed from the edge, forming a “center well”.